JUSHI P10 Ultra Low Weight Powder Chopped Strand Mats

Ready to experience high-quality products at a price that works for you? Contact us for a quote today!

P10 Powder Chopped Strand Mat is made of randomly distributedchopped E-glass strands held together by a powder binder.

P10 is mainly used to produce automotive headliners and can alsobe used for other applications according to requirements.

Product Features

  • High tensile strength,good mat integrity
  • Uniform distribution of chopped strands
  • Smooth surface of mats,good conformability of strands to the surface

Specification and Technical Parameters

ltemArea weight variationMoisture contentSizing contentTensile breaking force
Test methodISO 3374ISO 3344ISO 1887ISO 3342

Jushi standard
≤300  g/m²:±6%
>300  g/m²:±5%
≤0.10 %See table belowSee table below
GB/T 17470
National standard
<300  g/m²:±12%
300~599 g/m²:±10 %
≥600  g/m²:±8%
≤0.20 %1.8 %~8.5 %,
The range should not exceed 2%
<300 g/m²:≥40 N
300~599 g/m²:≥60 N
≥600 g/m²:≥80 N
Product codeArea weightSizing contentTensile breaking forceProduct codeArea weightSizing contentTensile breaking force
E6CRMC22580  g/m²17.0 %(1±31%)≥70NE6CRMC450135g/m²9.0 %(1±31%)≥100N
E6CRMC300100  g/m²12.0 %(1±31%)≥80 NE6CRMC600150  g/m²8.0 %(1±31%)≥120 N
E6CRMC375110  g/m²12.0 %(1±31%)≥80NE6CRMC900225  g/m²6.0 %(1±31%)≥250 N

Instructions

  • The product is best used within 12 months after production, and should be kept in the original package before use.
  • Care should be taken when using the product to prevent it from being scratched or damaged.
  • The temperature and humidity of the product should be balanced with the ambient temperature and humidity before use, and theambient temperature and humidity should be properly controlled during the use.

Packaging

For detailed package size information, please download the product manual to view!

Storage

Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10~35and ≤80% respectively. To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.

Scroll to Top