JUSHI P30 Powder Chopped Strand Mats

Ready to experience high-quality products at a price that works for you? Contact us for a quote today!

P30 powder chopped strand Mat is made ofrandomly distributed chopped E-glass strands held togetherby a powderbinder. It iscompatible with unsaturated polyester and vinyl ester resins.

P30 is designedspecifically for use in continuous laminating process to produce skylights. It can also be used to make automotive bodypanels.

Product Features

  • High tensile strength, smooth unwinding
  • Fast, full wet-out in resin, leaving no white strands
  • Good transparency ofparts

Specification and Technical parameters

 ItemArea weight variationMoisture contentSizing contentTensile breaking force
  Test methodISO 3374ISO 3344ISO 1887ISO 3342
  Jushi standard≤ 300 g/m2:  ± 6 % 
> 300 g/m2:  ± 5 %
≤ 0. 10 %see table belowsee table below
 GB/T 17470 National standard< 300g/m2:  ± 12 % 300 ~ 599 g/m2:  ± 10 % ≥ 600 g/m2:  ± 8 %≤ 0. 20 %1 . 8 %  8. 5 %, The range should not exceed2%< 300 g/m2:  ≥ 40 N 300 ~ 599 g/m2:  ≥ 60 N ≥ 600g/m2:  ≥ 80 N
product codeArea weightsizing contentTensie breaking forceproduct codeArea weightsizing contentTensile breaking force
EMC200200 g/m24. 2 %(1±31%)≥ 60 NEMC375375g/m22. 6 %(1±31%)≥ 100 N
EMC225225g/m24. 2 %(1±31%)≥ 80 NEMC450450g/m22. 3 %(1±31%)≥ 120 N
EMC300300 g/m23. 1 %(1±31%)≥ 100 NEMC600600 g/m22. 4 %(1±31%)≥ 150 N

Instructions

  • The product is best used within 12 months after production, and should be kept in the original package before use.
  • Care should be taken when using the product to prevent it from being scratched or damaged.
  • The temperature and humidity of the product should be balanced with the ambient temperature and humidity before use, and theambient temperature and humidity should be properly controlled during the use.
  • The cutter rollers and rubber rollers should be maintained regularly.

Packaging

For detailed package size information, please download the product manual to view!

Storage

Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature and humidity should be maintained at -10~35and ≤80% respectively. To ensure safety and avoid damage to the product, the pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care should be taken to correctly and smoothly move the upper pallet.

Scroll to Top